How to operate the cotton swab machine safely?

Before the correct operation of the cotton swab machine, each part must be checked carefully to ensure the smooth operation in the later period.

1. Before starting the cotton swab machine, check whether the equipment has faults and whether the required raw materials are available. (Whether the internal glue is applicable, whether the external glue is added, and whether the bamboo stick is filled)

2. Adjust the equipment to the normal speed of 350-400 tubes/min to make it operate normally.

3. During the operation of the cotton swab machine, it is strictly forbidden to put your fingers into the cotton beater and the transition wheel; When cleaning chains and gears, it is forbidden to stretch iron wire or other tools into the cotton beater; If it is necessary to wipe or debug, the power supply must be cut off first to make it stop running completely.

4. Clean the air inlet of cotton suction fan and suction cup fan regularly to avoid excessive waste cotton affecting the suction effect.

5. When the equipment is in normal production, the operator shall conduct self inspection and pick out the defective products in time.

6. During the operation of the equipment, the glue hole on the die head shall be kept unobstructed and unblocked frequently to avoid affecting the product quality due to its blockage.

7. When operating equipment, operators shall wear protective equipment such as hats and masks; Clothes, hair, hands and other body parts are strictly prohibited from contacting any operation and transmission parts of the equipment.

8. During equipment maintenance and repair, the power supply shall be cut off and the equipment shall not be operated until it is completely stopped.

9. The cotton swab machine must be cleaned before leaving work every day to ensure the smooth start of the equipment next time.